Showing posts with label Flag. Show all posts
Showing posts with label Flag. Show all posts

DAZ 3D - Antarctica Expedition: The Encampment, Sled and Poses

The Antarctica Expedition is inspired by The Endurance expedition.
In 1914 Sir Ernest Shackleton set out from England on a daring expedition. His goal was the first crossing of the Antarctic continent.
This was not Shackleton's first journey to Antarctica. Like a handful of other explorers at the beginning of the 20th century, Shackleton had been determined to venture to the mysterious continent at the bottom of the earth. And although these early expeditions were intent on scientific advancement, the grand prize was the South Pole - unclaimed territory, where no human had ever stood.
Shackleton first headed south in 1901, accompanying Robert F Scott on an unsuccessful bid for the Pole. Six years later he led his own expedition to within approximately 100 miles of his goal, further south than anyone had gone before. Here, taking stock of his party's failing supplies and health, Shackleton made the heartbreaking decision to turn back. In 1911 the race was finally won by Roald Amundsen of Norway.
With the prize of the Pole having been claimed, Shackleton embarked on a new challenge in 1914 - to cross the entire continent on foot, from the Weddell to the Ross Sea. Leaving the island of South Georgia in December, his ship Endurance battled her way through pack ice toward the continent. But while deep in the pack of the Weddell Sea, the ship was trapped and slowly crushed by the ice.
Shackleton and his men became castaways in one of the most hostile environments on earth. The expedition was a failure - yet the unimaginable saga of survival that followed ensured that it was for this, the failed Endurance expedition, that Shackleton is ultimately remembered.



DAZ 3D

by
Ansiko

Compatible Figures
Genesis 2 Male

Compatible 3D Software
DAZ Studio 4.8

Features
  • The Encampment Props: (.DUF)
    • bag_1
    • bag_2
    • bag_3
    • bag_4
    • barrel
    • barrels
    • crate_1
    • crate_2
    • crate_3
    • crate_4
    • crate_5
    • crate_6
    • crate_7
    • crate_8
    • crate_9
    • crate_10
    • flag_polar_expedition_1
    • flag_polar_expedition_2
    • flag_polar_expedition_3
    • flag_polar_expedition_4
    • glass
    • kerosene_lamp_down
    • kerosene_lamp_up
    • mess_kit_1
    • mess_kit_2
    • plate
    • polar_tent
    • stove_oil
    • snow_bag_1
    • snow_bag_2
    • snow_bag_3
    • snow_bag_4
    • snow_barrel
    • snow_barrels
    • snow_crate_1
    • snow_crate_2
    • snow_crate_3
    • snow_crate_4
    • snow_crate_5
    • snow_crate_6
    • snow_crate_7
    • snow_crate_8
    • snow_crate_9
    • snow_crate_10
    • snow_polar_tent
  • The Sled Props: (.DUF)
    • sled
    • sled_snow
    • lading
    • lading_snow
    • harness_1
    • harness_2
    • harness_3
    • harness_4
  • Materials: (.DUF)
    • bag_1_cold
    • bag_2_cold
    • bag_3_cold
    • bag_4_cold
    • barrel_cold
    • barrels_cold
    • crate_1_cold
    • crate_2_cold
    • crate_3_cold
    • crate_4_cold
    • crate_5_cold
    • crate_6_cold
    • crate_7_cold
    • crate_8_cold
    • crate_9_cold
    • crate_10_cold
    • polar_tent_cold
    • lading_cold
    • lading_default
    • sled_cold
    • sled_default
  • Antartica Expedition Poses: (.DUF)
    • 48 Poses for Genesis 2 Male(s)
  • Textures Include:
    • 50 Texture, bump and Displacement Maps (512x512, 1024x1024, 2048x2048, 4096x4096)
    • Texture Templates available through the Product Library
  • DAZ Studio Material Presets (.DUF)

DAZ 3D - The Base Camp Part 1

This pack lets you build as many military base as you need! Each part includes a fully-built base camp of grouped items which you can ungroup and save separately as you like. Take the individual objects and create your own base.
The Base Camp part 1 includes wind turbine, Gas Station, modular fences (left, right and corner), 7 various Lands, garden fence, flag, barrier, power pole, Housing 4, housing 5 and Post Office.
Plenty of detail lets you take advantage of a multitude of locations for your camera! This base camp is ideal for military and scientific scenes both old and contemporary Compatible with : The Base Camp part 2

Note:
All of the base camp (part 1 and Part 2) includes many polygons, so may tax lower spec systems.

Anecdotally:
The Base Camp is inspired by Los Alamos and The Manhattan Project who was a research and development project that produced the first atomic bombs during World War II. Los Alamos, New Mexico, was the site of Project Y, or the top-secret atomic weapons laboratory directed by J. Robert Oppenheimer. The site was so secret that one mailbox, PO Box 1663, served as the mailing address for the entire town. The mountains allowed the scientists ample opportunity to relax, by skiing, swimming, and hiking. But they spent most of their time in laboratories, overcoming challenge after challenge to develop the Littly Boy (gun-type) and Fat Man (implosion) atomic bombs. Initially Los Alamos was to have been a military laboratory with Oppenheimer and other researchers commissioned into the Army. Oppenheimer went so far as to order himself a lieutenant colonel's uniform, but two key physicists, Robert Bacher and Isidor Rabi, balked at the idea. Conant, Groves and Oppenheimer then devised a compromise whereby the laboratory was operated by the University of California under contract to the War Department.



DAZ 3D

Compatible 3D Software
DAZ Studio 4.6

Features
  • The Base Camp Part 1: (.DUF)
    • Gas Station
      • Pumps
    • 2 House Options
    • Wind Turbine
    • 16 Chainlink Fence Options
    • Flag
    • 2 Barriers
    • 3 Power Pole Options
    • Post Office
    • Landscape
  • Material Options:
    • 5 Housing
    • 7 Landscape
  • Textures Include:
    • 9 Texture Normal and Transparency and Maps (512 x 512 to 4096 x 4096)
  • DAZ Studio Material Presets (.DUF)

DAZ 3D - Ridge Walk Mountains

Used as a courier route between city states for hundreds of years, the Ridge Walk is now mostly visited by sherpa guides and the thrill seeker extreme sport enthusiasts that pay extra for the experience. We're high enough up in the clouds that the early morning Sun can't burn away the fog.
Ridge Walk Mountains is a full 360 degree environment for DAZ Studio 4.6+. It includes the Ridge Walk and the surrounding mountainous landscape in the distance. There are 13 "simple fog" camera presets included that generate the obscured horizon images seen in the rendered promos. No postwork used. There is a highly saturated skydome beyond that hints at clouds beyond the haze and fog. The Uber Environment 2 promo light set is also included to cast shadows as seen in the promos.
Luckily the make shift rope bridge has been maintained and the 3 morphable wind flags are big and visible and important to pay heed to. A sudden burst of wind can send you plummeting to your death on either side. So watch your step, and watch the skies, not much cover up here and there could be something lurking in the clouds. There's a hint of grass between the rocks, though not much grows at this altitude.



DAZ 3D

Compatible 3D Software
DAZ Studio 4.6

Features
  • Ridge Walk Mountains: (.DUF)
    • Ridge Walk Mountains Preload Set:
      • Mountains
      • Rope Bridge
      • Flags
        • 2 Windy Morphs
      • Grass
      • Rocks
      • Skydome
      • 13 "Simple Fog" Cameras
      • UberEnvironment 2 Lightset
  • Textures:
    • 04 Texture and Displacement Maps (4096 x 4096)
    • 10 Texture and Displacement Maps (2048 x 2048)
    • 01 Texture Map (2048 x 1536)
    • 01 Texture Map (1536 x 2048)
    • 03 Texture Maps (1024 x 1024)
    • 01 Texture Map (807 x 681)

Fantasy Castle 2011 - Castle Keep 2

This beautifully detailed 3D castle construction kit has a whimsical fairytale look. This pack can be used alone or with the Fantasy Castle 2011 - Castle Surround and Fantasy Castle 2011- Castle Keep for even more castle-building possibilities. High resolution diffusion (texture), bump, and displacement maps provide stunning realism. The DAZ Studio version includes DAZ Studio materials and individual OBJ scene files for DAZ Studio 2, 3 and 4.



DAZ 3D

Compatible 3D Software
Poser, DAZ Studio

Features
  • 11 figures for Fantasy Castle 2011 - Castle Keep (CR2, OBJ):
    • Building 1
    • Building 2
    • Tower7
    • Tower8
    • Tower8 mirrored
    • Tower9
    • Tower9 mirrored
    • Tower10
    • Tower10 mirrored
    • Stairs
    • Flag
  • 1 Castle Keep preload (CR2)
  • 1 Castle Keep scene file (DS2)
  • 2 Preloads for Castle Keep 2 to place on Fantasy Castle grounds
    (requires Fantasy Castle Grounds, Fantasy Castle 2011 - Castle Surround, and Fantasy Castle 2011 - Castle Keep)
  • Textures:
    • 55 texture, bump, transparency and displacement maps (3500 x 3500)
  • Poser 5 Material poses (PZ2)
  • Poser 6+ Material presets (MC6)
  • DAZ Studio Material presets (DS)

Dark Knight Horse Bundle

Dark Knight Horse Bundle is a 3D pack of racing champion, fantasy horse, textures, and poses. ID: 56963 Artists: Linday Created By: Re...